PRIME 16″PCC 9MM AR-9 RIFLE, GUNMETAL W/ BLUE ACCENTS

kr42,487.00

FEATURES

The Prime PCC AR-9 rifle was developed from the input of some of the top shooters participating in competitive shooting sports. This featherweight rifle is an out-of-the-box solution to get you to the top of your game. The Lead Star Arms Prime AR-9 rifle is engineered to be the pinnacle of performance. Lower your times and take the competition by storm by choosing a Lead Star Arms Prime PCC AR-9 Rifle.

 

Features:

 

Upper Receiver: Fully CNC machined from 7075-T6 aluminum for extreme precision and enhanced durability. Skeletonized for further weight reduction. Flat top Picatinny design for versatility in mounting optics and other enhanced components. CNC engraved numbered rail system. Lead Star’s truss system design reinforces key areas for increased strength without added weight. M4 feed ramps for added reliability.

Lower Receiver: Includes our integrated feed ramp for reliable feeding including hollow points! Integrated and reliable LRBHO (last round bolt hold-open) for AR-15 bolt release functionality in an AR-9. LRBHO is easily removed with 3 screws for competition shooters. Use with Lead Star™ bolt carrier groups, these were tested during development and proven to work reliably for the last round bolt hold-open function. Huge magwell entry chamfer for way faster and easier magazine changes. No aftermarket funnel is needed it is so large. Glock® magazine compatible. Fully CNC machined from 7075-T6 billet aluminum for extreme precision and enhanced durability. Lead Star’s truss system design reinforces key areas for increased strength without added weight. Front magwell grip surface is designed for the operator to grip and maintain weapon control even in the most extreme conditions. Tension device to increase rigidity between upper and lower receivers. A built-in trigger guard eliminates the need for a flip-down trigger guard. Designed to be compatible with MIL-spec upper receivers so it can be used if necessary but lines will not match.

15″ Handguard: Ravage™ CNC machined from 6061-T6 aluminum for extreme precision and enhanced durability. The unique design offers ultra capture around the barrel nut eliminating the requirement for anti-rotation tabs. Eliminates harmonics from attached accessories greatly improving weapon accuracy. Four Picatinny slots at the 12 o’clock position for mounting backup sights. M-LOK slots at the 3 and 9 o’clock positions and full-length M-LOK at the 6 o’clock position for mounting only the Picatinny rail needed or accessories. 7075-T6 aluminum barrel nut for the ultimate in lightweight design and strength.

Fire Control Group: Enhanced Hiperfire® ECL competition straight bow trigger. Adjustable shoe and springs can be customized to 15 possible trigger weights. Hipershoe® for trigger finger comfort and adjustability.

Fire Selector: Radian™ Talon™ ambidextrous safety selector modular design that can be installed as a standard 90° or as a 45° short throw by simply rotating the shaft 180° inside the lower receiver. Selector levers install using a precision machined dovetail interface with a spring-loaded retention stud to lock the lever in place, with no screws to come loose or break. Levers are machined from billet aircraft-grade aluminum and the center shaft is machined from hardened steel with a black nitride finish.

Barrel: Lead Star™ 1:10 twist ultralight 9mm barrel is precision machined from 416R (stainless steel) to make your PCC/AR-9 perform at its maximum accuracy. Designed light at 19.7 oz for much quicker transitions between targets and reduce your times in competition!

Bolt Carrier Group: Enhanced 8620 steel bolt, with an enhanced firing pin and external 5.56 style ejector. Uniquely finished with a Salt Bath Black Nitride and utilizing an M16 style extractor, this bolt is designed for superior performance and durability. Has coil spring retaining pin ideally used for skeletonized receivers. Removable weight for different recoil systems making it compatible with captured spring buffer systems.

Charging Handle: Ravage™ unique design geometry produces a faster release and a linear-pull. The extended design allows easier charging with added optics and sights. High strength for added reliability under extreme conditions.

Anti-rotation Pins: Titanium design for a more consistent trigger pull weight and captures trigger pins increasing reliability.

Gas System: Blowback for reliability.

Muzzle Device: Ravage™ enhanced design compensator dramatically reduces recoil. Unique geometry minimizes muzzle rise for faster follow-up shots. Pre-drilled on the bottom for pinning muzzle brake to the barrel. Precision CNC machined 7075-T6 aluminum.

Grip: Ravage™ ultra-lightweight grip with traction grooves on all sides. Ultimate in comfort, every edge is rounded or chamfered. Skeletonized design for maximum weight savings. High strength for added reliability under extreme conditions. Precision CNC machined 6061-T6 aluminum.

Stock: Ravage™ fixed stock design with cheek weld. Extends stock out to 9 1/2″ from the rear of the lower receiver making it more comfortable to shoot. Precision CNC machined from 6061-T6 billet aluminum. High strength for added reliability under extreme conditions. Super lightweight at only 6.0 oz. Slot for easy attachment of sling.

Buffer Tube: 7 position Strike Industries™ with scalloped surfaces that decrease friction with tight-fitting stocks, and shaves weight while retaining mass in critically stressed areas. Further enhancements include a supported buffer retaining tab that also serves to more easily index your receiver extension. Machined from 7075-T6 aluminum for much greater strength.

Buffer System: Blitzkrieg Components hydraulic buffer machined from 17-4 stainless steel and uses hydraulic shock absorption to dampen the impact of the bolt at the rear of its travel. Weight and length have been optimized for the 9MM application so that it runs reliably, softens recoil, smooths out the action, and stops just behind the bolt catch using any 9mm ammo type. Smoothest running, softest recoiling 9mm buffer available and will allow faster follow up shots, improved accuracy, and less wear.

Castle Nut: Ultralight design for further weight reduction and strength. Precision CNC machined from 7075-T6 billet aluminum.

Receiver End Plate: Ravage™ enhanced design allows for mounting QD swivel sling attachment. Raised QD attachment point makes attaching sling easier and faster. Precision CNC machined from 6061-T6 billet aluminum. High strength for added reliability under extreme conditions.

More Titanium: Ultralight exotic metal grip screw, handguard fastener screws, stock bolt for further weight reduction and strength.

Magazine: Comes standard with 1 SGM Tactical black 33 round 9mm magazine.

Finish: Enhanced Type II anodized.

 

Spesifikasjoner:

Chamber: 9mm (9×19)

Barrel Length: 16″

Weight: 5.3 lbs

Gas System: Blowback

Barrel Profile: Ultra-lightweight

Barrel Steel: 416R

Barrel Finish: Stainless

Muzzle Thread: ½” x 28

Twist Rate: 1 in 10″

Barrel Extension: Blowback

Muzzle Device: Enhanced Muzzle Break

Receiver Material: Lead Star Billet 7075 T6

Handguard Type: Lead Star Ravage Carbon Fiber 15″ MLOK Handguard

Bolt Carrier Group Included: Yes

Bolt Steel: 8620

Bolt Carrier Profile: 9mm

Charging Handle Included: Yes

Lower Receiver: Lead Star Billet 7075 T6 Aluminum

Receiver Finish: Anodized

Grip: Barrage Grip

Buffer Tube: 7075 T6 Aluminum

Adjustment: 6 Position

Stock: Lead Star lightweight carbine stock with 6 position adjustment.

Fire Control Group: Enhanced Hiperfire® Elite trigger

Magazine: Comes standard with 1 SGM Tactical black 33 round 9mm magazine.

 

 

På lager